R&S®EU230A/ED230A VHF/UHF Multichannel Receiver
Options
| Designation Type | Uses, specifications, features and benefits |
|---|---|
| Options | |
| TestGenerator/MC R&S® GT231T1 | Initiated built-in test (IBIT), convenient frequency change Note: For further information, see Related Links at the bottom of this page |
| Multicoupler R&S® VT231 | Loss-free distribution of VHF and UHF antenna signals to eight outputs Note: For further information, see Related Links at the bottom of this page |
| Auxiliary Equipment1) | |
| Standard Racks R&S® KG2000 | Optimized for ATC systems with R&S® Series200 communication equipment Note: For further information, see Related Links at the bottom of this page |
| AF Remote Control Unit R&S® GB208 | Control of up to eight radio channels from a single operator position Note: For further information, see Related Links at the bottom of this page |
| Loudspeaker Unit R&S® GA200 | Test loudspeaker for multichannel receiving equipment 1/819" screw-in module for slot 8 of 19" Adapter R&S® KR231A8 with1-out-of-7 RX selector switch |
| Control Unit R&S® GB406C1 | Remote operation of multichannel radios
|
| Control Software R&S® GB406-S | Application-specific and factory-loaded software (EPROM forR&S® GB406C1) Note: The R&S® GB406-S has to be orderedseparately together with the control units (equal quantities) |
| Cabinet R&S® KK406 | For variable desktop installation of R&S® GB406C1 Dueto its swivel-type mounting holder the R&S® KK406 offers afine-graded adaptability for optimum sight and operatorconvenience |
| AC Power Supply R&S® NGRA24 | AC Power Supply for rack integration 24 V/1.25 A; profilerackmounting |
| AF distribution splitter/combiner R&S® GH215 | Active AF line combiner and AF line splitter for rackintegration |
| Option for R&S® GH215 R&S® KR215 | 19" mounting frame for 8 × R&S® GH215x |
| AF distribution passive splitter/combiner R&S® GH215P | With separate output for voice recorder |
| Service Kit RX R&S® KA231 | Maintenance and testing, troubleshooting andrepair Special-to-type test kit for
The kitincludes all necessary test adapters, cables and REM BUS testsoftware, all packed in a handy portable case with individuallyshaped foam inserts and user information |
| Accessories | |
| Cable R&S® KS201C | For a RX main/standby pair (RXA + RXB): for horizontal connection of 2 receivers installed in neighbouring slots of one R&S® KR231A8 19" adapter |
| Cable R&S® KS201C | For a RX main/standby pair (RXA + RXB): for vertical connection of 2 receivers installed in the same slot of two stacked R&S® KR231A8 19" adapters |
| Cable R&S® KS201C | For RX REM Bus and DC supply of R&S® VT231 (+ R&S® GT231T1), for connection of
Thus 2 cables are required for a completely equipped R&S® KR231A8 19" adapter. This special flat-type bus cable has mating connectors to link two cables |
| Set of mating connectors R&S® KS201 | For R&S® IN201A power supply which is part of the R&S® EU/ED231A receivers or R&S® GM231A INBAND control Note: The RF (BNC) plug type for the receive antenna cable depends on the feeder type and is therefore not included in the set. See comment onR&S® KS231. |
| Set of mating connectors R&S® KS231 | For R&S® VT231 VHF/UHF multicoupler IBIT (X11) and REM Bus (X15) connectors. The R&S® VT231 itself includes 7 fixed connected RF cables with mounted BNC plugs and graded lengths matching the associated receivers RX1 to RX7 Note1: R&S® KS231 does not include RF connectors for antenna and cascading output (connector types depend on cable type) Note2: For RX REM Bus connection X10 (including DC supply of R&S® VT231) with associated receivers the R&S® KS201C special cable model .04 is available |
1) In contrary to options, which can be additionally integrated into basic modules or equipment, auxiliary equipment for R&S® Series200 is defined to be standalone equipment for operation or service. The following types are important system components for complete VHF/UHF radio systems or for qualified maintenance, testing, troubleshooting and repair.
